Bauknecht fogão tgv 7401 ti Manual

Manuais em PDF
9 Páginas Português

Bauknecht fogão tgv 7401 ti
18
Installation
Technical
information for the
Installer
This cooktop can be
embedded in a worktop 20
to 50 mm thick. If there is
no oven beneath the
cooktop (any oven
installed must be
manufactured by us and
equipped with a cooling
system), insert a separator
panel at a minimum
distance of 20 mm from
the bottom of the cooktop.
Note: before installation,
make sure that the local
gas delivery conditions
(nature and pressure of
gas) are compatible with
the settings of the
cooktop, as indicated on
the Product Description
Sheet and on the rating
plate.
If a vertical piece of
furniture is installed,
there must be a gap of
at least 100 mm
between it and the edge
of the cooktop.
Before installation, remove
the plastic film protecting
the appliance, if provided.
The outer surfaces of the
furniture or appliances
adjacent to the cooktop
must be heat resistant
(heat protection
“Y”
)
according to standards.
Installation must comply
with current local
regulations.
In the room where the
cooktop is installed, there
must be enough air to
allow the gas to burn
correctly (see the separate
Product Description Sheet).
The natural flow of air
must take place through
an adequate opening, that
must be:
- permanent, made on one
of the outside walls of the
room, and communicating
with the exterior in an
area away from sources of
pollution;
- built so as to ensure that
its openings, both on the
inside and on the outside,
cannot be obstructed,
intentionally or
accidentally;
- protected by a metal grid
or mesh that does not
reduce its working section;
- situated near the floor
level and positioned so as
not to interfere with the
operation of the fume
exhaust devices.
- The fume exhaust has to
take place through an
appropriate hood or fan
installed on the wall or on
the window.
4gb61591b.fm5 Page 18 Friday, April 11, 2003 12:50 PM
Manuais Relacionados para Bauknecht fogão tgv 7401 ti